Compare Products

2021 Exmark Staris S-Series 60 in. Kawasaki FX730V 23.5 hp
2021 Exmark Staris S-Series 60 in. Kawasaki FX730V 23.5 hp

Specs

General Information

Manufacturer
Exmark
Exmark
Model Year
2021
2021
Model
Staris S-Series 60 in. Kawasaki FX730V 23.5 hp
Staris S-Series 60 in. Kawasaki FX730V 23.5 hp
Model Code
STS730GKA60400
STS730GKA60400
Color
Red
Red

Body

Frame
Tractor - Welded, heavy-duty 1.5 x 3 in. tubular steel.
Tractor - Welded, heavy-duty 1.5 x 3 in. tubular steel.
Safety Features
Safety package - Operator Presence Controls (OPC) with safety interlock system indicators
Safety package - Operator Presence Controls (OPC) with safety interlock system indicators

Drivetrain

Transmission/Drive

Hydro

Drive description - Two hydro gear 12 cc pumps powering two parker 12 cu. in. motors

Hydro

Drive description - Two hydro gear 12 cc pumps powering two parker 12 cu. in. motors

Number of Speeds
Infinitely variable speed selection
Infinitely variable speed selection
Travel Speed Forward
0 - 10.0 mph (12.9 kmph)
0 - 10.0 mph (12.9 kmph)
Travel Speed Reverse
0 - 4.0 mph (6.4 kmph)
0 - 4.0 mph (6.4 kmph)
Drive Tires

23 x 10.50-12 Carlisle Turf Master

Drive wheel release - Allows unit movement without engine running

23 x 10.50-12 Carlisle Turf Master

Drive wheel release - Allows unit movement without engine running

Tire Size

Casters - 0.50 in. thick caster yoke arms with tapered roller bearings

Front caster tires - 12 x 6.0-6, smooth-tread, semi pneumatic tires with tapered roller bearings

Casters - 0.50 in. thick caster yoke arms with tapered roller bearings

Front caster tires - 12 x 6.0-6, smooth-tread, semi pneumatic tires with tapered roller bearings

Parking Brake
Lever-actuated bar brake
Lever-actuated bar brake

Electrical

Battery
12 V with 15 A alternator
12 V with 15 A alternator
Instrumentation
Fuel indicator - Float gauge
Fuel indicator - Float gauge
Hour Meter
Engine
Engine

Engine

Engine Make
Kawasaki
Kawasaki
Engine Model
FX730V, V-Twin Series
FX730V, V-Twin Series
Gross Horsepower

23.5 hp @ 3,600 rpm engine speed

The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

23.5 hp @ 3,600 rpm engine speed

The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Displacement
726 cc
726 cc
Fuel System
Electronic Fuel Injected
Electronic Fuel Injected
Air Cleaner
Heavy-duty canister air filtration system
Heavy-duty canister air filtration system
Fuel Type
Gas carbureted
Gas carbureted
Fuel Capacity
10 gal. (37.9 l), dual fuel tanks with dual fill location
10 gal. (37.9 l), dual fuel tanks with dual fill location

Measurements

Length
70.5 in. (179.1 cm)
70.5 in. (179.1 cm)
Width
72.8 in. (184.9 cm)
72.8 in. (184.9 cm)
Height
46.7 in. (118.6 cm)
46.7 in. (118.6 cm)
Weight
Curb - 1,041 lb.
Curb - 1,041 lb.
Cutting Width
60 in.
60 in.
Mowing Height Range
1.5 - 5.0 in. (3.8 - 12.7 cm)
1.5 - 5.0 in. (3.8 - 12.7 cm)
Mowing Height Adjustments
0.25 in. (0.64 cm) increments adjustable from operator’s platform
0.25 in. (0.64 cm) increments adjustable from operator’s platform

Operational

Steering
Control - Twin levers with adjustable front reference bar to modify forward ground speed
Control - Twin levers with adjustable front reference bar to modify forward ground speed
Deck Construction

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

Deck Lift
Single point HOC; with mechanical lift-assist spring
Single point HOC; with mechanical lift-assist spring
Deck Discharge
Side discharge standard, with molded discharge chute and option to bag or mulch
Side discharge standard, with molded discharge chute and option to bag or mulch
Spindles
Blade - No maintenance, sealed and non greasable spindles; 7.75 in. diameter cutter housing with 1.75 in. diameter splined blade driver 1.0 in. diameter spindle shaft.
Blade - No maintenance, sealed and non greasable spindles; 7.75 in. diameter cutter housing with 1.75 in. diameter splined blade driver 1.0 in. diameter spindle shaft.
Blades
3 blades at 20.50 in. length
3 blades at 20.50 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm
Power Take-Off (PTO)
Engagement - Warner 200 ft. lb. clutch
Engagement - Warner 200 ft. lb. clutch

Other

Warranty
Commercial - 4 years limited or 1,250 hours limited (with no hour limit the first 2 years)
Commercial - 4 years limited or 1,250 hours limited (with no hour limit the first 2 years)

Features

Features

  • OPERATOR POSITION: The large, open platform comfortably positions operators between the drive tires, making them feel integrated into the machine, while also allowing them to get on and off the machine quickly and efficiently.
  • HIGH OF CUT: The height of cut system was developed for operators to quickly and accurately change the cut height by simply raising and lowering the deck.
  • SMART CONTROLLER: The intuitive Smart Controller reduces downtime with maintenance reminders and on-screen machine health diagnostics along with an enhanced interlock display with both engine and PTO hour displays.
  • CUT QUALITY: Available in a variety of deck widths, Staris S-Series features proven Exmark UltraCut Series 4 decks providing unmatched performance and Exmark's legendary quality of cut.
  • DRIVE SYSTEM: The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.
  • SERVICEABILITY: The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.

Features

  • OPERATOR POSITION: The large, open platform comfortably positions operators between the drive tires, making them feel integrated into the machine, while also allowing them to get on and off the machine quickly and efficiently.
  • HIGH OF CUT: The height of cut system was developed for operators to quickly and accurately change the cut height by simply raising and lowering the deck.
  • SMART CONTROLLER: The intuitive Smart Controller reduces downtime with maintenance reminders and on-screen machine health diagnostics along with an enhanced interlock display with both engine and PTO hour displays.
  • CUT QUALITY: Available in a variety of deck widths, Staris S-Series features proven Exmark UltraCut Series 4 decks providing unmatched performance and Exmark's legendary quality of cut.
  • DRIVE SYSTEM: The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.
  • SERVICEABILITY: The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.