Home › Showroom › Compare Products

Compare Products

2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
Previous Next
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp in Winterset, Iowa
Previous Next
2024 Exmark Lazer Z E-Series 60 in. Briggs Vanguard 26 hp

Specs

General Information

Manufacturer
Exmark
Exmark
Model Year
2024
2024
Model
Lazer Z E-Series 60 in. Briggs Vanguard 26 hp
Lazer Z E-Series 60 in. Briggs Vanguard 26 hp
Model Code
LZE810GBV604A3
LZE810GBV604A3
Color
Red
Red

Body

Frame

Caster Forks - 0.50 in. thick caster yoke arms

Tractor Frame - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster Forks - 0.50 in. thick caster yoke arms

Tractor Frame - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Seat
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material
Seat Adjustment
Fore and aft from Operators’ Position
Fore and aft from Operators’ Position
Rollover Protection (ROPS)
2-post foldable ROPS standard with seat belt and latch
2-post foldable ROPS standard with seat belt and latch

Drivetrain

Transmission/Drive
Hydro drive
Hydro drive
Wheels/Tires
Wide pneumatic
Wide pneumatic
Drive Tires
24 x 12-12, 4 ply Super Turf®
24 x 12-12, 4 ply Super Turf®
Steering Tires
Front Caster Tires - 13 x 6.50-6, smooth-tread, semi-pneumatic
Front Caster Tires - 13 x 6.50-6, smooth-tread, semi-pneumatic
Parking Brake
Lever-actuated disc
Lever-actuated disc

Electrical

Battery
12V with 15A alternator
12V with 15A alternator
Instrumentation
Digital
Digital
Hour Meter
Engine
Engine

Engine

Engine Make
Briggs
Briggs
Engine Model
Vanguard 810
Vanguard 810
Horsepower
26 hp
26 hp
Starter
Electric
Electric
Fuel Type
Gas carbureted
Gas carbureted
Fuel Capacity
8 gal. with single fill location
8 gal. with single fill location

Measurements

Length
83.1 in. (211.1 cm)
83.1 in. (211.1 cm)
Width
72.8 in. (184.9 cm)
72.8 in. (184.9 cm)
Height
70.5 in. (179.1 cm)
70.5 in. (179.1 cm)
Weight
Curb - 1,279 lb.
Curb - 1,279 lb.
Mowing Width
60 in.
60 in.
Mowing Height Range
1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments
1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments

Operational

Steering
Control - Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions
Control - Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions
Deck Construction

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck Style - Floating Deck

Deck Style Description - Full-floating UltraCut Series 4. Side discharge standard

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck Style - Floating Deck

Deck Style Description - Full-floating UltraCut Series 4. Side discharge standard

Spindles
BladeNo maintenance, sealed and non-greasable spindles, 7.75 in. diameter cutter housing with 0.98 in. (25 mm) diameter spindle shaft and splined blade driver.
BladeNo maintenance, sealed and non-greasable spindles, 7.75 in. diameter cutter housing with 0.98 in. (25 mm) diameter spindle shaft and splined blade driver.
Blades
3 at 20.50 in. length
3 at 20.50 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm

Other

Includes
Cup holder
Cup holder

Features

Features

  • HYDRO DRIVE, SIMPLIFIED: Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
  • UNIBODY FRAME: Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
  • LESS TIME AT THE PUMP: Gas-powered E-Series models have a single 8-gallon tank with one fill location.
  • ON-BOARD DIAGNOSTICS: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • FEWER GREASE POINTS: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • ULTRACUT SERIES 4 DECK: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • REAR DISCHARGE DECK: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
  • TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.

Features

  • HYDRO DRIVE, SIMPLIFIED: Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
  • UNIBODY FRAME: Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
  • LESS TIME AT THE PUMP: Gas-powered E-Series models have a single 8-gallon tank with one fill location.
  • ON-BOARD DIAGNOSTICS: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • FEWER GREASE POINTS: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • ULTRACUT SERIES 4 DECK: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • REAR DISCHARGE DECK: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
  • TOOL-LESS BELT REMOVAL: Deck and hydro belt can be installed without using any tools.