Frame
Tractor - Welded, heavy-duty 1.5 x 3 in. tubular steel.
Tractor - Welded, heavy-duty 1.5 x 3 in. tubular steel.
Safety Features
Safety package - Operator Presence Controls (OPC) with safety interlock system indicators
Safety package - Operator Presence Controls (OPC) with safety interlock system indicators
Engine Make
Kawasaki
Kawasaki
Engine Model
FS600V, V-Twin Series
FS600V, V-Twin Series
Gross Horsepower
18.5 hp @ 3,600 rpm engine speed
The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
18.5 hp @ 3,600 rpm engine speed
The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
Displacement
603 cc
603 cc
Fuel System
Carbureted
Carbureted
Air Cleaner
Standard engine manufacturer's air filter
Standard engine manufacturer's air filter
Fuel Type
Gas carbureted
Gas carbureted
Fuel Capacity
5 gal. (18.9 l), single fuel tank with single fill location
5 gal. (18.9 l), single fuel tank with single fill location
Length
58.103 in.
58.103 in.
Weight
Curb - 779 lb.
Curb - 779 lb.
Cutting Width
36 in.
36 in.
Mowing Height Range
1.0 - 4.5 in. (2.54 - 11.4 cm)
1.0 - 4.5 in. (2.54 - 11.4 cm)
Mowing Height Adjustments
0.25 in. (0.64 cm) increments
0.25 in. (0.64 cm) increments
Steering
Control - Twin levers with adjustable front reference bar to modify forward ground speed
Control - Twin levers with adjustable front reference bar to modify forward ground speed
Deck Construction
7 ga. top that is formed and continuously seam welded, 7 ga. side skirt
Deck style - Floating deck
Deck style description - Full-floating UltraCut Series 3
7 ga. top that is formed and continuously seam welded, 7 ga. side skirt
Deck style - Floating deck
Deck style description - Full-floating UltraCut Series 3
Deck Lift
Single point HOC
Single point HOC
Deck Discharge
Side discharge standard, with flexible discharge chute and option to bag or mulch
Side discharge standard, with flexible discharge chute and option to bag or mulch
Spindles
Blade - No maintenance, sealed and non greasable spindles; 7.75 in. diameter cutter housing with 1.75 in. diameter splined blade driver 1.0 in. diameter spindle shaft
Blade - No maintenance, sealed and non greasable spindles; 7.75 in. diameter cutter housing with 1.75 in. diameter splined blade driver 1.0 in. diameter spindle shaft
Blades
2 blades at 18.00 in. length
2 blades at 18.00 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm
Power Take-Off (PTO)
Engagement - Warner 105 ft. lb. clutch
Engagement - Warner 105 ft. lb. clutch